[Tutorial] how to use an Xbox 360 controller on NZP

so i was bored and kinda messed around with NZP 1.1 gamepad settings in the console and i found out the right mapping for an xbox 360 controller. it only works for moving and looking round with the analog sticks. i haven't found anything for the triggers(LT or RT) yet

First, you're going to need to have "joystick" set to "1"
after every change to the commands, do the command "joyadvancedupdate"

Second, you have to set "joyadvanced" to "1" as well.
again, use the command "joyadvancedupdate"

Third, this is how the "joyadvaxis" should be put in order from up to down, "joyadvaxisr" to "joyadvaxisz"
2
4
0
3
1
0

1= move forward and backwards
2= look up and down
3= move left and right
4= look left and right

and again, use "joyadvancedupdate"

some of the axis controllers may be inverted so its a good thing to check and fix if you don't like it like that.

and Finally, make sure "joysidesensitivity" is set to "1.0"

and "joyyawsensitivity is set to "-1.0"

and you should be done with that.
for the buttons, you can do it manually from the "customize controls" setting in the options

i may update this later if i find anything else

This works also with PPSSPP and my PS4 controller, sadly only with USB and not Bluetooth

Some people want a PC version instead tho. It runs better in my opinion. And I didn't see a tutorial on how to do it in the first place.